網路教學(e-Learning)校園社群(e-Community)服務台(e-Service)系所班網(e-Class)Login
Position: 林鴻儒 > ePortfolio > Profile
Profile
Education
Work Experience
Publication
Project
Honor
Personal Data
Name: 林鴻儒
Department: 南台科技大學 / 化學工程與材料工程系 [elearning courses]
Research: Smart materials, Polymeric materials, Biomimmetic polymers, Biomaterials
Office: I 407
Contact Information: chem.stut.edu.tw/chinese/teachers/hrlin/G307/G307.htm
Self-Introduction

For those  are interested in polymeric materials, smart materials, and biomedical materials are welcomed to join us.

Education
1. Auburn University / Materials Engineering (Doctor, 1987-03 ~ 1991-05)
2. Rose-Hulman Institute of Technology / Chemical Engineering (Master, 1985-09 ~ 1987-05)
Publication
Paper
1. Han-Yun Yao, Hong-Ru Lin, Geng-Pin Sue, Yiu-Jiuan Lin, "Chitosan-based hydrogels prepared by UV polymerization for wound dressing, Accepted by Polymer & Polymer Composites," , May, 2017.
2. S. Adriana Estrada A. and Hong-Ru Lin, "Fabrication of Biomimetic Gecko Toe Pads and their Characterization," Polymer Engineering and Science,Volume 57, Issue 3,283-290, Mar, 2017.
3. Hong-Ru Lin, Yu-Sheng Li, Yiu-Jiuan Lin, "Novel microencapsulated Pluronic–chitosan nanomicelles for lung delivery," Colloid and Polymer Science 294(7):1209–1216, Jul, 2016.
4. Hong-Ru Lin, Shih-Han Wang, Chia-Chin Chiang, Yun-Ching Juang, Fu-Ann Yu, Liren Tsai, "High strain-rate response of injectable PAA hydrogel," Journal of Biomaterials Science, Polymer Edition,26(9):534-544, Apr, 2015.
5. Yiu-Jiuan Lin, Ga-Hwa Lee, Chih-Wei Chou, Yi-Peng Chen, Te-Hsing Wuand Hong-Ru Lin, "Stimulation of wound healing by PU/hydrogel composites containing fibroblast growth factor-2," Journal of Materials Chemistry B, 3, 1931-1941, Jan, 2015.
6. Yiu-Jiuan Lin, Feng-Chien Hsu, Chih-Wei Chou, Te-Hsing Wu, and Hong-Ru Lin, "Poly(acrylic acid)-Chitosan-Silica Hydrogel Carrying Platelet Gel for Bone Defect Repair," Journal of Materials Chemistry B, 2, 8329-8337, Sep, 2014.
7. Hong-Ru Lin, Yu-Feng Liu & Yiu-Jiuan Lin, "Novel Formable PVA-Based Gel as a Potential for AtopicDermatitis Treatment," International Journal of Polymeric Materials and Polymeric Biomaterials, Volume 63, Issue 18, 923-930, Jul, 2014.
8. Te Hsing Wu, Hong-Ru Lin, "Preparation of PAA-Ch/Hydrogel, it Containing Bone Cell, PRP Nanocomposites and the Animal Trials," Advanced Materials Research, 915-916, 895, Apr, 2014.
9. Yu-Li Lo, Yijun Lin, Hong-Ru Lin, "Evaluation of Epirubicin in Thermogelling andBioadhesive Liquid and Solid Suppository Formulationsfor Rectal Administration," International Journal of Molecular Sciences, 15 (1), 342-360, Jan, 2014.
10. Te Hsing Wu, Hong-Ru Lin, and Lie Hang Shen, "The Preparation and Characteristic of PNIPAAm/ Hydrogel Nanocompounds by Radiation Techniqus for Bone Filling Materials and its Cytoxicity,Applied Mechanics and Materials," 419:407-411, Oct, 2013.
11. Hong-Ru Lin, Yu-Chaio Chen, Yiu-Jiuan Lin, Ming-Hung Ling, Chih-Wei Chou, You-Cheng Hseu, Yueh-Hsiung Kuo, K. J. Senthil Kumar, "pH-Sensitive Hollow Alginate-Chitosan Hydrogel Beads for Bitter Gourd Delivery," International Journal of Polymeric Materials and Polymeric Biomaterials, 63 (1), 41-47, Sep, 2013.
12. Hong-Ru Lin, Pei-Csang Chang, "Novel Pluronic-Chitosan micelle as an ocular delivery system," Journal of Biomedical Materials Research, Part B:Applied Biomaterials,Volume 101B, Issue 5, Pages: 689–699, Jul, 2013.
13. Hong-Ru Lin, Chin-Yu Hsu,Yu-Li Lo, "Preparation and Characterization of Dual Phase TransitionOral Hydrogel for Sustained Release of Epirubicin," International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (14), 763-769, Jun, 2013.
14. Chih-Wei Chou, Onon Batnyam, Huey-Shan Hung, Horng-Jyh Harn,Wen-Fu Lee, Hong-Ru Lin, Jing-Gun Chung, Yang-Chia Shih, Ssu-Yin Yen, Yueh-Hsiung Kuo and Min-Han Tsao, "Highly bioavailable anticancer herbal-loadednanocarriers for use against breast and colon cancerin vitro and in vivo systems," Polymer Chemistry, 4 (6), 2040–2052, May, 2013.
15. Yu-Li Lo, Chin-Yu Hsu, Hong-Ru Lin, "pH- and thermo-sensitive Pluronic/poly(acrylic acid) in situ hydrogels for sustained release of an anticancer drug," Accepted by Journal of Drug Targeting, Aug, 2012.
16. Ko-Shao Chen, Shu-Chuan Liao, Hsin-Ming Wu, Tsao Yu-Chia and Hong-Ru Lin, "Fabrication of QCM type smother detection sensor by plasma polymerizing SnOx organic-like films and spin coating with polyethylene glycol, Biomedical Engineering: Applications, B," , Jan, 2012.
17. Hong-Ru Lin, Chao-Chih Tseng, Yiu-Jiuan Lin, and Ming-Hung Ling, "Novel In-situ Gelling Liquid Suppository for Site Targeting Delivery of Anti-Colorectal Cancer Drugs," Journal of Biomaterials Science, Polymer Edition, 23, 807–822, 2012.
18. Hsin-Ming Wu, Ko-Shao Chen, Shu-Chuan Liao, Hong-Ru Lin, Yu-Chia Tsao, "Post treatment of plasma-polymerized SnOx organic-like films with polyethylene glycol for improving CO gas sensitivity," Accepted by Journal of Nanoscience and Nanotechnology, 2012.
19. Hong-Ru Lin, Wen-Ju Chen, Ming-Hung Ling, "pH- Sensitive Dioctadecylamine-501 Polymeric Micelles for Delivery of Insulin," Journal of Nanoscience and Nanotechnology, 11 (3), 1823-1833, Mar, 2011.
20. Hong-Ru Lin, Li-Hau Ou, Yiu-Jiuan Lin, and Ming-Hung Ling, "Hollow pH-Sensitive Ca-Alginate/Poly(acrylic acid) Hydrogel Beads as Drug Carriers for Vancomycin Release," Journal of Applied Polymer Science, 118( 4), 1878–1886, Nov, 2010.
21. K. S. Chen, W. Y. Chen, S. C. Liao, Y. T. Haung, S. C. Chen, H. R. Lin, F. H. Lin, "Surface graft polymerization acrylic acid onto bamboo charcoal and to improve ammonia adsorption," Desalination and Water Treatment, 17(1-3), 168-175, May, 2010.
22. Hong-Ru Lin, Shi-Ping Yu, Yiu-Jiuan Lin, and Tsui-Shuang Wang, "High pH Tolerance of a Chitosan–PAA Nanosuspension for Ophthalmic Delivery of Pilocarpine," Journal of Biomaterials Science, Polymer Edition, 21, 141-157, 2010.
23. J. M. Yeh, K. C. Chang, C. W. Peng, B. Chand, S.C. Chiou, H. H. Huang, C. Y. Lin, J. C. Yang, H. R. Lin, C .L. Chen, "Preparation and Insulation Property Studies of Thermoplastic PMMA-Silica Nanocomposite Foams," Polymer Composites, 30, 715-722, 2009.
24. Hong-Ru Lin, Ming-Hung Ling, Yiu-Jiuan Lin, "High Strength and Low Friction of PAA-Alginate-Silica Hydrogel as Potential Material for Artificial Soft Tissue," Journal of Biomaterials Science, Polymer Edition, 20, 637–652, 2009.
25. Jui-Ming Yeh, Kung-Chin Chang, Chih-Wei Peng, Mei-Chun Lai, Chih-Bing Hung, Sheng-Chieh Hsu, Shyh-Shin Hwang, Hong-Ru Lin, "Effect of dispersion capability of organoclay on cellular structure and physical properties of PMMA/clay nanocomposite foams," Materials Chemistry and Physics 115, 744-750, 2009.
26. Ko-Shao Chen, Pei-Yu Liu, Tsui-Shan Hung, Shu-Chuan Liao, Su-Chen Chen, Hong-Ru Lin, Wei-Yu Chen, Chi-Kuang Feng, "Preparation of Titanium Oxide-containing Organic Film by Dipping Ti(OR)4 and Cold Plasma oxidizing on PET," Applied Surface Science 256, 1101–1105, 2009.
27. Ko-Shao Chen, Hsin-Ming Wu, Hong-Ru Lin, Shu-Juan Liao, Tsui-Shan Hung, Hsiu-Chia Lin, Yu-Chia Tsao, "Novel stable humidity layers prepared by surface graft polymerization of anionic monomers mixing with phenol-formaldehyde," Biomedical Engineering: Applications, Basis and Communications, 21(6), 371-374, 2009.
28. S. H. Hsu, K. S. Chen, H. R. Lin, S. R. Chang, "Effect of Plasma Gas Flow Direction on Hydrophilicity of Polymer by Small Zone Cold Plasma Treatment," Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry, 38 (2), 221-224, Mar, 2008.
29. Ko-Shao Chena, Shu-Ju Chang, Sheng-Hsiang Hsu, Hong-Ru Lin, Su-Chen Chen, "The Glow and No Glow Zone Effect on Surface Wettability Modified in O2 or Hexamethyldisilazane Cold Plasma Treatment," Desalination 233, 227–231, 2008.
30. Jui-Ming Yeh, Kung-Chin Chang, Chih-Wei Peng, Sheng-Che Chiou, Shyh-Shin Hwang, Jen-Chang Yang, and Hong-Ru Lin, "Effect of Vinyl-Modified Silica and Raw Silica Particles on the Properties of As-Prepared Polymer-Silica Nanocomposite Foams," Journal of Nanoscience and Nanotechnology, 8(12), 6297-6305, 2008.
31. Ko-Shao Chen, Su-Chen Chen, Hong-Ru Lin, Tsong-Rong Yan, and Ching-Ching-Tseng, "A Novel Technique to Immobilize DNA on Surface of a Quartz Crystal Microbalance by Plasma Treatment and Graft Polymerization," Materials Science and Engineering C, 27, 716-724, May, 2007.
32. H. R. Lin, K. S. Chen, S. C. Chen, C. H. Lee, S. H. Chiou, T. L. Chang, and T. H. Wu, "Attachment of Stem Cells on Porous Chitosan Scaffold Crosslinked by Na5P3O10," Materials Science and Engineering C, 27, 280-284, Mar, 2007.
33. Hong-Ru Lin, Shi-Ping Yu, Chun-Jung Kuo, Huei-Jen Kao, Yu-Li Lo, and Yiu-Jiuan Lin, "Pilocarpine-loaded Chitosan-PAA Nanosuspension for Ophthalmic Delivery," Journal of Biomaterials Science, Polymer Edition, 18(2), 205-221, Feb, 2007.
34. Ko-Shao Chen, Su-Chen Chen, Yi-Chun Yeh, Wei-Cheng Lien, Hong-Ru Lin, Jen-Ming Yang, "The Study of Immobilization Thermal-Sensitive Hydrogel onto ePTFE Film Use the Cold Plasma and Photo-Grafting Technique," Advanced Materials Research, 15-17, 187-192, 2007.
35. Ko-Shao Chen, Su-Chen Chen, Yi-Chun Yeh, Hong-Ru Lin, Wen-Fu Lee, Heng-Hsien Lee, "Comparison with Physics and Chemical Property of SBS/AA Copolymer Using Thermal Polymerization and UV Graft-Polymerization Methods," Materials Science Forum, 539-543,1288-1293, 2007.
36. Huei-Jen Kao, Yu-Li Lo, Wen-Jong Vong, Yiu-Jiuan Lin, and Hong-Ru Lin*, "Treating Allergic Conjunctivitis Using In Situ Polyelectrolyte Gelling Systems," Journal of Biomaterials Science, Polymer Edition, 17(10), 1191-1205, 2006.
37. H. J. Kao, H. R. Lin, Y. L. Lo, and S. P. Yu, "Characterization of Pilocarpine-Loaded Chitosan/Carbopol Nanoparticles," J. of Pharmacy and Pharmacology, 58 (2), 179-186, 2006.
38. Ko-Shao Chen, Hong-Ru Lin, Su-Chen Chen, Jui-Che Tsai, and Yuan-An Ku, "Long Term Water Adsorption Ratio Improvement of Polypropylene Fabric by Plasma Pre-treatment and Graft Polymerization," Polymer Journal, 38(9), 905-911, 2006.
39. K. S. Chen, Y. A. Ku, H. R. Lin, T. R. Yan, D. C. Sheu, and T. M. Chen, "Surface Grafting Polymerization of N-Vinyl-2-pyrrolidone onto a Poly(ethylene terephthalate) Nonwoven by Plasma Pretreatment and its Antibacterial Activities," J. of Applied Polymer Science, 100 (1), 803-809, 2006.
40. Yu-Chun Wu, Shyh-Yu Shaw, Hong-Ru Lin, Tzer-Min Lee, and Chyun-Yu Yang, "Bone Tissue Engineering Evaluation Based on Rat Calvaria Stromal Cells Cultured on Modified PLGA Scaffolds," Biomaterials, 27, 896-904, 2006.
41. C. W. Chou, S. H. Hsu, H. Chang, S. M. Tseng, and H. R. Lin, "Enhanced Thermal and Mechanical Properties and Biostability of Polyurethane Containing Silver Nanoparticles," Polymer Degradation and Stability, 91, 1017-1024, 2006.
42. K. S. Chen, Y. A. Ku, H. R. Lin, T. R. Yan, D. C. Sheu, T. M. Chen, and F. H. Lin, "Preparation and Characterization of pH Sensitive Poly(N-vinyl-2-pyrrolidone/itaconic acid) Copolymer Hydrogels," Chemistry and Physics, 91, 484-489, Jan, 2005.
43. H. R. Lin, K. C. Sung, and W. J. Vong, "In Situ Gelling of Alginate/Pluronic Solutions for Ophthalmic Drug Delivery," Biomacromolecules, 5, 2358-2365, Jan, 2004.
44. H. R. Lin and Y. J. Yeh, "Porous Alginate/Hydroxyapatite Composite Scaffolds for Bone Tissue Engineering: Preparation, Characterization, and In Vitro Studies," Journal of Biomedical Materials Research (Applied Biomaterials), 71B, 52-65, Jan, 2004.
45. K. S. Chen, C. W. Chou, S. H. Hsu, and H. R. Lin, "Surface Grafting Polymerization and Crosslinking of Thermosensitive NIPAAM Hydrogels onto Plasma Pretreated Substrates and Drug Delivery Properties," Materials Science Forum, Vols. 426-432, pp. 3267-3272, Jan, 2003.
46. H. R. Lin, Y. J. Yeh, C. J. Kuo, and C. Y. Yang, "Porous Alginate/HAP Sponges for Bone Tissue Engineering," Materials Science Forum, Vols. 426-432, pp. 3043-3048, Jan, 2003.
47. H. R. Lin, C. J. Kuo, and Y. J. Lin, "Synthesis and Characterization of Biodegradable Polyhydroxy Butyrate-Based Polyurethane Foams," Journal of Cellular Plastics, 39 (2), 101-116, Jan, 2003.
48. H. R. Lin, C. J. Kuo, C. Y. Yang, S. Y. Shaw, and Y. J. Wu, "Preparation of Macroporous Biodegradable PLGA Scaffolds for Cell Attachment Using Mixed Salts as Porogen Additives," Journal of Biomedical Materials Research (Applied Biomaterials), 63, 271-279, Jan, 2002.
49. M. D. Shau, C. W. Lin, W. H. Yang, and H. R. Lin, "Properties of Cyclic Phosphine Oxide Epoxy Cured by Diacids and Anhydride," Journal of Applied Polymer Science, 84, 950-961, Jan, 2002.
50. H. R. Lin, M. D. Shau, and Z. W. Chiou, "Mechanical Characterization of Microcellular Foamed PVC/Wood-Flour Composites," Journal of Polymer Research, 8, 241-251, Jan, 2001.
51. H. R. Lin, "Solution Polymerization of Acrylamide Using Potassium Persulfate as an Initiator: Kinetic Studies, Temperature and pH Dependence," European Polymer Journal, 37, 1507-1510, Jan, 2001.
52. H. R. Lin and K. C. Sung, "Carbopol/Pluronic Phase Change Solutions for Ophthalmic Drug Delivery," Journal of Controlled Release, 69, 379-388, Jan, 2000.
53. H. R. Lin and C. T. Lin, "Mechanical Properties and Morphology of Recycled Plastic Wastes by Solution Blending," Polymer - Plastics Technology & Engineering, 38(5), 1031-1050, Jan, 1999.
54. H. R. Lin, "The Effects of Foaming and Annealing on Mechanical Properties and DSC Scans of Gas Saturated and Non-gas Saturated High Impact Polystyrene," Cellular Polymers, 17(6), 402-418, Jan, 1998.
55. H. R. Lin, "The Structure and Property Relationships of Commercial Foamed Plastics,," Polymer Testing, 16(5), 429-443, Jan, 1997.
56. H. R. Lin and S. G. Advani, "Processing Models and Characterization of Thermoplastic Composite Wound Parts," Polymer Composites, 18(3), 405-411, Jan, 1997.
57. Hong-Ru Lin and Wartan A. Jemian, "The Effects of Cell Content on the Mechanical Characteristics of Structural Foams," Journal of Cellular Plastics, 27, 295-319, May, 1991.
58. 14. Chih-Wei Chou, Onon Batnyam, Huey-Shan Hung, Horng-Jyh Harn,Wen-Fu Lee, Hong-Ru Lin, Jing-Gun Chung, Yang-Chia Shih, Ssu-Yin Yen, Yueh-Hsiung Kuo and Min-Han Tsao, "Highly bioavailable anticancer herbal-loadednanocarriers for use against breast and colon cancerin vitro and in vivo systems," Polymer Chemistry
59. Hong-Ru Lin, Pei-Csang Chang, "Novel Pluronic-Chitosan micelle as an ocular delivery system," Journal of Biomedical Materials Research, Part B:Applied Biomaterials,Volume 101B, Issue 5, Pages: 689–699,July 2013.
Domestic Paper
1. 林鴻儒, "國內及國際研討會論文共214篇,詳如附件," 1996-2018
Book and Report
1. 林鴻儒, "專書及技術報告共46篇,詳如附件,"
Patent
1. 林鴻儒、陳彥廷, "多孔性骨修復材及其製備方法," 中華民國專利發明第I-546324號, Aug, 2016.
2. 林鴻儒, "感溫凝膠組成物及其應用," 中華民國專利發明第I-415891號, Nov, 2013.
3. 林鴻儒、周志謂、凌銘鴻、蘇廉晴、馬怡嫺, "可變色之感溫水膠面膜及其製備方法," 中華民國專利發明第I-400095號, Jul, 2013.
4. 林鴻儒、蕭世杰、劉聿豐、葉明倫、黃琇琳,減壓墊, "減壓墊," 中華民國專利新型第M-451886號, May, 2013.
5. 林鴻儒、凌銘鴻、陳禹樵, "可控制釋放之珍珠粉膠囊及其製備方法," 中華民國專利發明第I-378803號, Nov, 2012.
6. H. R. Lin and K. C. Sung, "Novel Ophthalmic Drug Delivery Formulations and Method for Preparing the Same, U. S. Patent 6,511,660 B1.," U. S. Patent 6,511,660 B1., Jan, 2002.
7. 宋國峻、林鴻儒, "輸送眼藥用之原位成膠Pluronic/Carbopol複合醫藥組合物及其製法," 中華民國專利發明第I-227143號
8. 林鴻儒、宋國峻、汪文忠, "輸送眼藥用之原位成膠Alginate/Pluronic複合配方之醫藥組合物、製備方法與醫藥用途," 中華民國專利發明第I-342785號
Project
1. 腫瘤內局部藥物遞送的溫感性注射式奈米微胞-水膠混成系統之開發(107-2221-E-218-006-) (2018-08 ~ 2019-07)
2. 自我修復技術應用於汽車美容 鍍膜之開發 (2017-09 ~ 2018-08)
3. PVA自我修復水凝膠之製備、特性與應用(106-2221-E-218-030-) (2017-08 ~ 2018-07)
4. 仿生階層式結構表面之製備與特性分析(105-2221-E-218-039-) (2016-08 ~ 2017-07)
5. 以新穎之軟性模板合成片狀導電性聚苯胺(105-2221-E-218-040-) (2016-08 ~ 2017-07)
6. 開發生物可分解性水凝膠作為促進傷口癒合之局部蛋白質藥物傳輸系統(2/2)(105-2622-B-006-005-CC2) (2016-02 ~ 2017-01)
7. 以生物功能化之Chitosan表面改質Pluronic奈米微胞搭載腫瘤標靶藥物之研發(104-2221-E-218-032-) (2015-08 ~ 2016-07)
8. 將來自魚鱗之氫氧基磷灰石製成人工骨之研發 (2015-04 ~ 2015-09)
9. 開發生物可分解性水凝膠作為促進傷口癒合之局部蛋白質藥物傳輸系統(1/2)(104-2622-B-006-011-CC2) (2015-02 ~ 2016-01)
10. 檢測分析服務-溼式薄膜顯微結構觀察 (2015-01 ~ 2015-12)
11. 魚鱗粉萃取所得之氫氧基磷灰石成份鑑定及對Putty物性之影響 (2014-08 ~ 2014-12)
12. 魚鱗粉之氫氧基磷灰石成份鑑定 (2013-10 ~ 2014-02)
13. 微囊化Chitosan-Pluronic奈米粒子載體應用在肺部傳輸之研發(102-2221-E-218-040-) (2013-08 ~ 2014-07)
14. 精密機械產業價值提升計畫 (2013-06 ~ 2013-11)
15. 皮膚墊片材料微生物檢測 (2012-12 ~ 2013-07)
16. 皮膚墊片材料安全性檢測 (2012-11 ~ 2013-07)
17. 皮膚墊片(Gel pad)材料性質檢測 (2012-08 ~ 2013-07)
18. 利用幾丁聚醣表面改質Pluronic製備輸送Cromolyn奈米微胞之研發(101-2221-E-218-008- ) (2012-08 ~ 2013-07)
19. 以圓柱體凝膠提昇減壓墊應力分散之開發 (2012-06 ~ 2012-11)
20. 環保固態凝膠減壓墊之開發 (2012-05 ~ 2012-10)
21. 以高強度凝膠體提昇減壓墊舒適感之開發 (2011-07 ~ 2011-12)
22. 搭載血小板膠奈米複合骨材生物相容性評估(100-2623-E-218-001-NU) (2011-01 ~ 2011-12)
23. 治療異位性皮膚炎可成膜凝膠之研發(99-2622-E-218-017-CC3) (2010-11 ~ 2011-10)
24. 以原位成膠法製備新穎液態栓劑做為輸送結腸直腸癌藥物之定點釋放劑型(99-2221-E-218-004-) (2010-08 ~ 2011-07)
25. 環境用藥—凝膠型餌劑之研發 (2010-07 ~ 2010-12)
26. 孔洞性水膠攜帶人體血小板膠作為軟骨修復材料(99-NU-E-016-001-) (2010-01 ~ 2010-12)
27. 輸送奈米珍珠粉新劑型之研發(98-2622-E-218-012-CC3) (2009-11 ~ 2010-10)
28. 輸送泛艾黴素之硫醇化幾丁聚醣/聚丙烯酸奈米微粒的製備及活體外藥物釋放與活體內抗腫瘤效應評估(97-2221-E-024-001-) (2008-08 ~ 2009-11)
29. 關節軟骨修補材料之動態機械性質研究(97-2218-E-151-001-) (2008-01 ~ 2008-10)
30. 輸送Pilocarpine之Chitosan-Alginate中空奈米球體的製備及活體外藥物釋放與活體內藥理反應之研究(96-2221-E-218-022-MY3) (2007-08 ~ 2010-07)
31. 應用於骨組織工程之多孔形PEEK-HA生物複合材料之研究(95-2221-E-218-033-) (2006-08 ~ 2007-07)
32. 以PAA-PNIPAAm雙層網狀結構水膠製造人工髓核之研發(95-2622-E-218-004-CC3) (2006-05 ~ 2007-04)
Honor
1. 指導學生陳彥廷參加2017 International Symposium on Novel and Sustainable Technology壁報論文競賽獲得第一名 (2017-11)
2. 指導學生參加2017南臺科技大學第十九屆校慶學生專題製作競賽獲得第一名 (2017-11)
3. 指導學生陳彥廷參加2017年幾丁質幾丁聚醣暨生物材料研討會壁報論文競賽獲得第二名 (2017-08)
4. 指導學生翁碩弘參加2017年功能性材料研討會暨科技部專題研究計畫成果發表會壁報論文競賽獲得第二名 (2017-05)
5. 指導學生陳彥廷參加2017年功能性材料研討會暨科技部專題研究計畫成果發表會壁報論文競賽獲得第二名 (2017-05)
6. 指導學生陳彥廷參加2016年功能性材料研討會暨科技部專題研究計畫成果發表會論文發表競賽獲得佳作 (2016-10)
7. 指導學生陳彥廷參加2016年幾丁質幾丁聚醣暨生醫材料研討會壁報論文競賽獲得優等獎 (2016-08)
8. 指導學生陳彥廷參加2016 The 15th (ISAT-15) International Symposium on Advanced Technology壁報論文競賽獲得佳作 (2016-05)
9. 指導學生劉聿豐參加2016 International Symposium on Novel and Sustainable Technology壁報論文競賽獲得第一名 (2016-01)
10. 指導學生陳彥廷參加2015年全國技專校院學生實務專題製作競賽【化工材料群】獲得佳作 (2015-03)
11. 指導學生施幸華參加2015年幾丁質幾丁聚醣暨生物材料研討會英文口頭報告競賽獲得第一名 (2015-01)
12. 指導學生林毅峻參加2014年全國技專校院學生實務專題製作競賽【化工材料群】獲得佳作 (2014-01)
13. 指導學生林毅峻參加2014年全國技專校院學生實務專題製作競賽【化工材料群】獲得佳作。
14. 指導學生林毅峻參加2014年全國技專校院學生實務專題製作競賽【化工材料群】獲得佳作。
15. 12. 指導學生林毅峻參加2014年全國技專校院學生實務專題製作競賽【化工材料群】獲得佳作。
16. 100-2績優導師
17. (100上)住宿生訪視績優導師
18. 指導學生陳禹樵參加2011尖端材料科技協會學生論文競賽獲得莘茂獎(優等獎)
19. 指導學生參加第六屆化工E車(Chem-E-Car)創意設計暨競賽總決賽榮獲第六名
20. 指導學生凌銘鴻參加2007第一屆塑膠材料應用及加工技術論文競賽榮獲佳作
21. 指導學生歐力豪參加2007第一屆塑膠材料應用及加工技術論文競賽榮獲第三名
22. 指導學生石政坪參加2008第二屆塑膠材料應用及加工技術論文競賽榮獲第二名
23. 指導學生李冠廷參加2008第二屆塑膠材料應用及加工技術論文競賽榮獲第三名
24. 指導學生陳靖良、王泰元參加2009南區學生專題製作競賽榮獲佳作
25. 指導學生陳威廷參加2009第三屆塑膠材料應用及加工技術論文競賽榮獲第二名
26. 指導學生凌銘鴻、徐楓茜等參加2010夢想起飛創業競賽榮獲第二名
27. 指導學生曾昭智參加2010第四屆塑膠材料應用及加工技術論文競賽榮獲第一名
28. 指導學生徐楓茜參加2010第四屆塑膠材料應用及加工技術論文競賽榮獲佳作
29. 指導學生陳禹樵參加2011第五屆塑膠材料應用及技術論文競賽獲得佳作
30. 指導專題生參加2011第十屆全國Chem-E-Car創意競賽榮獲【總錦標賽化學動力組】佳作
31. 指導專題生廖睿敏及鄭乃川獲得2007年全國技專校院學生實務專題製作競賽暨成果展化工群卓越獎榮獲第一名